Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DC/DC application design

Status
Not open for further replies.
C

ckJJ

Junior Member level 3
Joined
Feb 16, 2005
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,464
Hi hi,

If I use the DC/DC output of a buck converter to supply to the input of another DC/DC buck converter, will this affect the performance of the 2nd DC/DC converter output?

Thanks.
 

Certainly Not. But remember the power requirement for the second converter should be less than or equal to the output power of first.
 

ckJJ said:
Hi hi,

If I use the DC/DC output of a buck converter to supply to the input of another DC/DC buck converter, will this affect the performance of the 2nd DC/DC converter output?

Thanks.
Click to expand...

I agree with "awarapunshee".
Can you explain what its use?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top