Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

DAC Parameters from a Board Design Perspective

Status
Not open for further replies.

BabaYaga

Advanced Member level 4
Joined
Aug 1, 2012
Messages
106
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,298
Location
Hyderabad
Activity points
1,295
Hi Guys,
I am relatively new to designing with data converters and now i am designing a DAC evaluation board, I came across a lot of terms that i am not familiar with in the datasheet of the DAC and i would like to know what do all those parameters mean and what role does each parameter play in the performance, i am listing out the parameters below:

1 - Output Settling Time
2 - Output Noise
3 - Spurious Free Dynamic Range(SFDR)
4 - Two Tone Intermodulation Distortion
5 - Noise Spectral Density
6 - Adjacent Channel Leakage Ratio(ACLR)

I am using AD9117 and it has got an evaluation board with reference to the above system i have made a lot of changes to the reference design. i would like to know all about these parameters that i have listed above.
So, I request all the big guns of this forum to help me out in this endeavor and i am sure it will be a great learning experience for others as well. please give some references while posting answers(if possible) to better the understanding of the topic.

Thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top