Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Current Sense Transformer Clarification

sabu31

Advanced Member level 1
Joined
Jan 28, 2011
Messages
456
Helped
12
Reputation
24
Reaction score
13
Trophy points
1,298
Activity points
5,236
Dear All,

Are the attached current sense transformers interchangeably used except for max current limit.

Also is there any limit for terminating resistance. Or can we increase it based on the voltage requirement.

Thanking you.
 

Attachments

  • senhitr.pdf
    175.1 KB · Views: 76
  • P524-2903048.pdf
    298.5 KB · Views: 77
The CT have rougly similar data.

Burden resistor is primarily limited by core saturation flux (V*us integral). The values given in the pulse datasheet are related to the specified lower frequency limit and rated current, at higher operation frequencies or lower currents, increased Rt may be feasible.
 
Concluding:
* Pulse datasheet: Rt_max is given via Vt (and one can calculate Rt for different (fundamental) frequencies)
* Coilcraft datasheet: Rt_max is given in the table for f_min .... (and one can simply can multiply it with: f_app/f_min )
... where f_app means the fundamental frequency in your application.
Even low DC will kill performance!

Klaus
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top