could someone help me for cts of astro?

Status
Not open for further replies.
C

cihchenlin

Junior Member level 3
Joined
Mar 31, 2006
Messages
30
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Activity points
1,395
1: i want to get a cts for reset signal,so in *.sdc,i creat a clock for reset,but astro think it as a ignore pin for all reset pin?why?

2: i creat clock for clk1,i want to get cts for clk1 which must through the and gate to clk2,but dont know why? clk2 do not have cts? and i "set gated clock tree" on in astro?
 

1.. For doing CTS is reset, astCTS will work only for clock nets..

U can use astHFCTS (highfanout cts) and give the reset nets..

Added after 4 minutes:

2.... astro CTS assumes.. the input pin of and gate as stop point (sink pin) since u declared clock on the output port of that and gate.

U can either remove the create_clock clk2 and do cts with clock gating option on..

Or u can do another CTS for clk2..


Thanks

shankar
 

Thanks a lot,

1:in astro userguide,i found,i set impicit pin as "set default trigger edge" 1,and the reset signal have cts.

2:i want clk1 througn the and gate,in "encounter",i creat clk1,and set "through pin" at input pin of and gate,resove it,but in astro have no the command.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…