pcf file
Dear all,
I am trying to do some corner simulation in the ADE of candence, using the tool->corner... I use the tsmc018 process. I wrote a model file as cor_p3_libs.scs (following):
library cor_p3_libs
section tt_1.8_27
include "../rf018.scs" section=tt
include "../rf018.scs" section=tt_3v
..
include "../rf018.scs" section=tt_bip
endsection
section ff_2.0_125
include ..... section=ff
...
include ..... section=ff_bip
endsection
section ss_1.6_-40
include..... section=ss
....
include ....section=ss_bip
endlibrary
Then, in ADE, click Tools->corners.... In the corners window, I click setup -> Add library, in the dialog block jumped out, I fill the blank with the path and name of the above file, with the property single model libray.
Then, I set the temp, add the variables--vdd.
When I run the simulation, there is no error, but a notice:
"enter remote command mode using MPSC service (spectre, ipi, tt_1.8_27....)"
and the simulation seemed to be halted, and the process remains quiet like dead.
Any one have encoutned such problem? Please enlight me on this topic!
Thanks in advance.