T
press the left mouse button to select the "source" schematic or board you want to copy
then go to the Control panel window. but let SCH or BRD window visible -- for drag and drop function
with the mouse: press the left mouse button to select the "source" schematic or board
press the left mouse button to select the "source" schematic or board
"drag and drop" from control_panel_window to BRD_window.
For sure there is nothing named "source". --> Nobody knows the name of the .BRD or .SCH file you want to copy.What "source"? On the Control Panel? I see nothing that says "source".
You drive me crazy.
True, that´s my bad attribute, I know. I can´t stand to repeat something several times.You know, you get very upset at members on the Forum for not being clear on what they want
If you would have just explained that I needed to open the "projects" sub-folder under "Name", I
wouldn't have needed to ask you so many times to be clearer.
I didn´t thought about this.. Do you really need a dedicated explanation on how to use the control panel?
Yes - I get impatient - and ask again for information. This is the hard way for me ... to find a solution for the member.
Or do you think I should go the easier way: simply stop to respond.
I am building a stereo audio headphone amplifier for two of my grandchildren but the circuit I was given works extremely well, but
the range of the volume pot is woeful. I only need to give it a quarter turn and its already at full volume. Yet this was designed
this way to work well. I had spent ages in Google with zero results.
I will be inquiring about this later in the Forum, with diagrams, explanations etc. As I'm in no way an audio guru.
Start a new thread.
We (the forum members including me) will find a solution.
I´m pretty sure it has the drag-and-drop function.I am using Eagle 7.4, i dont seem to have the "drag and drop" function.
With the shown drag-and-drop function it is not possible to select just a bit of a board, because you select the text "file_two.brd" (you don´t select a picture of a board).I wonder if i have to copy/paste an entire board, and not just a small bit of layout?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?