Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Copper Pours - is there need for them in my design ?

Status
Not open for further replies.
J

jk_1420

Newbie
Joined
Apr 13, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
ny
Activity points
1,286
Copper Pours

Design is a mixed signal 4 layer board; rf single ended< 500Mhz, rf diff pairs <900Mhz and a dsp. Is there any value in adding a copper pour around the rf traces with vias every 1/20th wl?

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top