Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

converter dc-dc from ferrit

Status
Not open for further replies.
P

pol

Member level 2
Joined
Feb 3, 2012
Messages
47
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,526
I want to make a dc-dc converter from 311v to +75/-75 10 A,from ferrit and what the topology that I use ???
thanks..
 

In case you need a negative voltage (+75,-75), i would prefer flyback topology.
 

Flyback only good for about 100W. Half bridge good for 1KW or more.
 

what about the calculation in ferrit to get it?
 

You can look at Transformer and Inductor Design Handbook - 3rd Edition. Also you can use this website
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top