Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Convert USB to Serial Port

Status
Not open for further replies.

Mohamed Slama

Member level 4
Member level 4
Joined
Nov 8, 2013
Messages
72
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
443
Hi Friends

My Pic 16f877A send data to serial port , but my Lab top doesn't contain any serial port, can i convert usb to serial ?

what is the solution ?
 

Hi Mohamed, you have too many solutions for this issue, some of they are:

1- Use a FTDI chip, I don't remember the part numbers but is something like FT232. Search google.
2- Use another PIC, as the PIC18F4550. This pic is similar in pinout to 877A, but richer in features. Also there is a USB stack from Microchip, FREE, and also from many others, just google it.
3- There are too many solutions, search in google for PIC with USB interface or other chip options.

I hope this help you. Best regards. Yosmany325
 

You can buy a cheap USB to serial TTL converter from Hong Kong for less than £2.00 on eBay from many suppliers all made up and ready to go. They don't come with driver software so you have to find it from the manufacture of the chip web site. The main problem with these devices is if you plug it into a different USB port the serial port number changes. Apart from that they are a fantastic buy.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top