Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Controlling a TLC5940 using a uC

Status
Not open for further replies.
V

visiontec

Newbie level 4
Joined
Jul 29, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,321
tlc5940

Hi guys i want to use a TLC5940 driver to control an array of 16x16 LEDs.
Unfortunately i cant seem to understand the datasheet provided on TI's website:
https://focus.ti.com/lit/ds/symlink/tlc5940.pdf

I want to use this driver so i can adjust the grayscale on individual LEDs and because it can talk back to the uC if any errors occur. The TLC5049 can be communicated to serially.

Can someone help me with the communication with the TLC5049.
I cant find a 8051 implementation for this.

Any help will be great.
Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top