buenos
Advanced Member level 3
- Joined
- Oct 24, 2005
- Messages
- 961
- Helped
- 40
- Reputation
- 82
- Reaction score
- 24
- Trophy points
- 1,298
- Location
- Florida, USA
- Activity points
- 9,128
scpi usb
hi.
How to send SCPI control commands to a Digital Multi Meter over USB from an embedded application?
We have an Atmel ARM9 board with linux on it, and we want to control an Agilent (or any) DMM through USB. I know, we have to sent SCPI text commands.
I have to select an expensive type DMM to buy, but only a type, what we can connect to our HW-SW application. a new type, which is not end of life yet.
OK. but how? how many end-points? what type? if 2 then which is for send, which for receive? Or is it working with some kind of standard USB-RS232 driver?
hi.
How to send SCPI control commands to a Digital Multi Meter over USB from an embedded application?
We have an Atmel ARM9 board with linux on it, and we want to control an Agilent (or any) DMM through USB. I know, we have to sent SCPI text commands.
I have to select an expensive type DMM to buy, but only a type, what we can connect to our HW-SW application. a new type, which is not end of life yet.
OK. but how? how many end-points? what type? if 2 then which is for send, which for receive? Or is it working with some kind of standard USB-RS232 driver?