justRadojko
Newbie level 1
- Joined
- Feb 1, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 11
I've been following this forum for quite a while but now I have a problem of my own.
Together with a friend of mine I've developed ZigBee system for Home automation, just basic stuff on/off/dimming of light turning the heating on and off in order to regulate temperature. But now we would like to connect this system to internet so we are able to send commands from web browser and receive state of switches.
We have a coordinator off the system which should connect to local home access point and via it send network information to SQL database located on internet.
It would be great and I would be very grateful if someone could give me some general directions of what to do next. I've seen that lots of guys are using Microchip ethernet interface for this purposes but the whole picture is a bit blurry in my head.
If some more informations are needed, just ask.
Thanks in advance.
Together with a friend of mine I've developed ZigBee system for Home automation, just basic stuff on/off/dimming of light turning the heating on and off in order to regulate temperature. But now we would like to connect this system to internet so we are able to send commands from web browser and receive state of switches.
We have a coordinator off the system which should connect to local home access point and via it send network information to SQL database located on internet.
It would be great and I would be very grateful if someone could give me some general directions of what to do next. I've seen that lots of guys are using Microchip ethernet interface for this purposes but the whole picture is a bit blurry in my head.
If some more informations are needed, just ask.
Thanks in advance.