Connecting eight microcontrollers using i2c

[poonamkothawade]

I want to connect eight microcontrollers using I2C.
I amhaving problem with connection diagram and device addresses
Can anybody help me?
thank u

 

[FvM]

You can either use one master and seven slaves or implement a more complex multi-master scheme. With multi-master,
each peer can actively start communication, but arbitration of conflicting bus accesses is required. So the software effort is increasing.

Connect all SDA and SCL pins respectively and place pull-up resistors for both nodes. Assign unique device addresses.

 

[arbj]

how far apart are the mcus...??