How can 1 Kohm resistor with each row of a keypad can protect from having corrupted numbers on the output (lcd) and do we take the input of rows to the pic directly after the resistor as a method of connection, or do we connect the resistors to ground and take input to pic in between the terminal of the resistor and the ground??
Can we apply 5,9V to such PIC? Harmless or damaging?
The output of the 5V regulator is giving 5,9v not 5, even though i have branched 0.33 uf to the regulator input pin and 0.22 uf to the output the regulator.