abdulmakhdoom
Member level 2
How to connect LEDs from mobile phone to make a mobile torch.?
Welcome to EDAboard.com
Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Connect leds with cellphone?
- Thread starter abdulmakhdoom
- Start date
- Status
- Joined
- Apr 1, 2011
- Messages
- 13,814
- Helped
- 2,738
- Reputation
- 5,473
- Reaction score
- 2,648
- Trophy points
- 1,393
- Location
- Minneapolis, Minnesota, USA
- Activity points
- 103,109
Perhaps the easiest place to tap for power is at the charging connector. Maybe 5V? Then you just need an inline resistor to drop the voltage to the led.
You can fasten a bright white led to the phone, but the wiring will be cumbersome and prone to break.
Could the phone screen itself be bright enough to do the job? I've heard of lives being saved because someone used a cellphone as a flashlight.
You can fasten a bright white led to the phone, but the wiring will be cumbersome and prone to break.
Could the phone screen itself be bright enough to do the job? I've heard of lives being saved because someone used a cellphone as a flashlight.
abdulmakhdoom
Member level 2
If anyone give me any link to make this project I will be very thankful.
- Status
