amin5659
Member level 3
hi all. I've a CMOS logic line(0 to 3.3v) and i want to scale this line to 0 to 10v or 0 to 5v. (user will choose the output voltage level).
the width of the pulse's is about 200 ns and maximum rise and fall time allowed is about 100 ns :|.
output impedance of this port must be 50 ohm.
can you help me out?
thanks
the width of the pulse's is about 200 ns and maximum rise and fall time allowed is about 100 ns :|.
output impedance of this port must be 50 ohm.
can you help me out?
thanks