Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Clock Tree Synthesis - Buffers or Inverters?

Status
Not open for further replies.
A

alam4vlsi

Member level 1
Joined
Sep 12, 2013
Messages
40
Helped
8
Reputation
16
Reaction score
7
Trophy points
8
Activity points
220
In CTS, Which is best practice adding buffers or inverters ? Why ?
 

both, give more "possibility" to the tool.
you should more control the drive and to select the symetrical buffer/inverter.
 
But my question is Which is the best using buffers or inverters? buffer vs inverter
 

If you define only one type the tool will have some difficulties (by experience).
 

Inverters are usually preferred..

- - - Updated - - -

They have lesser delay and greater drive strength...
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top