Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

circular polarization

Status
Not open for further replies.

kishorekumar_ms

Member level 5
Joined
Nov 12, 2006
Messages
84
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,815
hi frns,

How to confirm the polarization of microstip antenna is whether right handed circular polarization or left handed circular polarization.... i mean by observing which parameters or graghs can we say the type of circular polarization that antenna is radiating...

curiously waiting 4 ur repliesss,
kishore.
 

to confirm CP

•using network analyzer
•illuminate with a known cp antenna
•reverse the polarization of this known cp antenna
•compare signal strengths of various polarizations

or go the more diificult route/ time consuming
•record amp & phase of AUT
•generate FF patterns using appropriate techniques
•generate patterns for both LH and RH
•compare patterns

Added after 1 minutes:

also per definition if you have access to the feed points and how those are fed i.e. phase you can easily define CP
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top