Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Circuits about telephone ring detection

Status
Not open for further replies.
S

saykodayi

Newbie level 4
Joined
May 9, 2006
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,309
do you have any circuits about telephone ring detection,links or ideas? urgent help please



many thanks from now
 

Re: need help

For a quick reply try this: (for cellular)
R1____________100K 1/4W Resistor
R2______________3K9 1/4W Resistor
R3______________1M 1/4W Resistor

C1,C2_________100nF 63V Polyester Capacitors
C3____________220µF 25V Electrolytic Capacitor

D1______________LED Red 10mm. Ultra-bright (see Notes)
D2___________1N5819 40V 1A Schottky-barrier Diode (see Notes)

Q1____________BC547 45V 100mA NPN Transistor

IC1____________7555 or TS555CN CMos Timer IC

L1_____________Sensor coil (see Notes)

B1_____________1.5V Battery (AA or AAA cell etc.)

the link is redcircuits.com
 

Re: need help

Works in most European countries

L5, L6 : for EMC suppression issue. Avoid unwant signal radiates through telephone line.
VAR1 : varistor, for protection against high voltage
Z1, Z2 : standard zener diode
PC1 : bidirection photocoupler. You can use PC817 or equivalent if kine reversal detection is not required.

Added after 13 minutes:

Can you read the schematic ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top