I have a simple question related to equivalent
circuit synthesize.
If I want to approximate a certain frequency
response--Z/Y/S parameter-- using a equivalent lumped network,
and if the topology (location of the R/C/L element and connection)
is fixed, how can I optimize the value of each element
to get a best approximation?
You should use a simulator with a optimization feature. Since the circuit is not very complicated , you can use ordinary RF simulator for that purpose such as Ansoft Serenade SV version ( it's free to download )
Two ways:
First, using @ds tuning feature to tune the value you need.
Second, usiing the @ds optimise controller component to optimise the circuit charactiristics according to your goal sets.