Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Choosing thermal profile for an SMD oven

Status
Not open for further replies.

Eugen_E

Full Member level 6
Joined
Nov 29, 2004
Messages
382
Helped
44
Reputation
86
Reaction score
11
Trophy points
1,298
Location
Romania
Activity points
2,839
Hello,

As in the title, I need a tutorial/ an explanation on how to choose a thermal profile for an reflow oven, depending on the parts used.
I know there are a few profile recommendations from manufacturers, but what to choose when making boards with many different components?
Is a standard available for this?

Thanks
 

rikie_rizza

Full Member level 6
Joined
Aug 5, 2006
Messages
339
Helped
29
Reputation
58
Reaction score
9
Trophy points
1,298
Location
Bikini Bottom, between a rock and a pineapple
Activity points
3,173
One thing for sure, green products (ROHS) need soldering temp up to 270C while gray or non green product require only 240C. The ramp up is still the same, 90 second in temp, 30 sec reflow, 60 sec cooling down.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top