Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

chip RFID sensitivity (-18 dBm) +HFSS

Status
Not open for further replies.
M

mano_apt

Junior Member level 1
Joined
May 25, 2009
Messages
18
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,356
Hello
how to enter the value -18 dbm chip(NXP) Sensitivity in the software HFSS
chip=22+195j
f=915Mhz:oops:
 

mano_apt said:
Hello
how to enter the value -18 dbm chip(NXP) Sensitivity in the software HFSS
chip=22+195j
f=915Mhz:oops:
Click to expand...

Hi,

I have the chip impedance at 915 MHz nxp chip: 24-j222 and anthor impedance in external supply mode 8-j228, what I should use while designing the RFID tag. How to simulate this port impedance either in CST MWS or HFSS?. Thanks for your help
 

What do u mean by "external supply mode"? Is it a semi-passive tag chip? Use the impedance of the right operation mode.

vk.palukuru said:
Hi,

I have the chip impedance at 915 MHz nxp chip: 24-j222 and anthor impedance in external supply mode 8-j228, what I should use while designing the RFID tag. How to simulate this port impedance either in CST MWS or HFSS?. Thanks for your help
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top