Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

checking layer copper by overlap on high current board

Status
Not open for further replies.
Z

zmrbill

Newbie level 1
Joined
Apr 11, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Hi, I'm an Engineering working on a high current (100A) PCB and I am looking for a good way to check for full copper pours across multiple layers. I would prefer to work with the gerbers or an image. One thought I had was to stack images based on overlap to produce a 3D part whose height would be number of layers overlapping. Another thought was to have the color change based on layer overlap.

Any suggestions?

The goal is to be able to visually be able to spot choke points and constrictions.

Bill
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top