Check my design for glowing white LED from 3V

[grittinjames]

hai



this is a simple method to glow white led from 3v .
if im switching s1 and s2 alternatly whether led will glow
plz analyse my idea .

 

[grittinjames]

plz check my design

i hope some body can use this design logic for multiplying voltage

 

[the_risk_master]

Re: plz check my design

Please give more description of yer docs for it to be more interesting to others

 

[grittinjames]

Re: plz check my design

Please give more description of yer docs for it to be more interesting to others

i want an explanation about this logic .
if some electronics master brain is giving a suitable answer im ready to give points

 

[Btrend]

Re: plz check my design

I had checked ur ckt, it seems that u have no chance to turn on 3.6V LED with ur ckt.
In order to turn on it, u need a boost, use LC type or charge pump type LED driver.

 

[masthdn]

Re: plz check my design

It's not works. U need AC supply with Diode-Cap Voltage Multiplier.

 

[grittinjames]

plz check my design

this circuit works ac charge pump!!!!!!

 

[gaom9]

plz check my design

I think this circuit will work but not quite well.
I think here S1 is not needed. Only S2 is ok.

 

[rajanarender_suram]

plz check my design

i think this ckt does not work as led driver as there is no way you add up voltage more than 3V at the +ve node of white-led even how u switch s1 and s2

 

[manish12]

Re: plz check my design

no way , ckt will not work ...

no seres formation between c and 3v




do one think connect the other terminal of s2 to the bottom terminal of c , then you use s1 and s2 to make ckt work.........

thank you.

 

[grittinjames]

plz check my design

thanks