Also, when I only look at the drill layer, I can see the drills (image).
How can I check if the drills are in the final files or not?
These are the files I get after the job is done.
When making the gerber file for drill (the .TXT?) only drills and holes are chosen in the right list, do I also need the dimension to be selected there and could that be the problem?
I assume you used the CAM processor to generate the Gerber files. You also need to generate the Excellon drill files. If you haven't done that, then you probably haven't generated them. You end up with three drill files with .dri, drd and .drl extensions. It is only really the .drd you need and it should look like this when loaded with a text editor:
So I'm not sure if they can/will use the other files or not. The .TXT file i get looks like this, but doesn't look right either. Can I create the Excellon files in Eagle and can I just save it as .TXT instead, as they want it?
I found out how to make the Excellon drill files in Eagle.
Do you think thats the drill file the manufacturer wants instead of the other .TXT file? Not sure what the data in the old TXT file is for. But Looks correct now.