Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Channel number in RN171 EK

Status
Not open for further replies.

ings

Member level 4
Member level 4
Joined
Sep 8, 2014
Messages
78
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
988
Hello;
please i would like to know the number of channel in RN171 EK
because in datasheet of rn 171 ek we have
sensor 4(3.3v) sensor 5 (3.3V) ...sensor 4(1.2V)
so if i connect my sensor with pin 2(sensor 4(3.3V)
i m wirting this command in teraterm:
Code:
$$$
show q 4
it display me a false value
so what it is the difference betwenn pin 2 ans pin 6
i m adding this line
Code:
set q power 0x04
but the same problem
can you help me please
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top