[SOLVED] Cell info display (at=cscb) using at commands

[avineshb006@gmail.com]

Hi All

I need an AT Command, to get the cell info display in SIM900 Modem,
i am trying to get this by using following commands,

AT+CMGF=1
>OK
AT+CNMI=0,0,2,0,0
>OK
AT+CSCB=0,"50","1"
>ERROR

but in the cscb command throws an error from my modem, Pleas tell me is there any other configuration i need to do in this AT commands, if so please help me,

 

[FvM]

Enable extended error messages to know why the command fails.

 

[avineshb006@gmail.com]

Hello FvM

Thanks for your reply, i had enablled the Extended Error Message by using AT+CMEE=1 Command, but this time also its response is ERROR oly for
AT+CNMI=0,0,2,0,0
>OK
AT+CSCB=0,"50","1"
>ERROR


Please thell is there any modification i need to do in this...

 

[FvM]

I don't have SIM900 modules and can't check the issue.

 

[Batang]

The AT+CENG command is what you need to use.

Cheers

 

[avineshb006@gmail.com]

Hi

Thanks for your reply, and finaly i had done the modification in AT Commands, now i am getting the Cell broadcast location by using the following Commands

AT+CMGF=1
>OK
AT+CNMI=2,0,2,0,0
>OK
AT+CSCB=0,"50","1"
>cell id my tower location
AT+CNMI=0,0,0,0,0
>OK

.....................
CHEERS

 

[alzomor]

HI

According to Sim900 at commands manual the "AT+CSCB" command selects cell broadcast SMS Message, How do use it to get cell ID and tower location?