Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

capacitor on PCB using @DS

Status
Not open for further replies.
kella

kella

Member level 3
Member level 3
Joined
Jun 29, 2004
Messages
58
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Activity points
494
I want to design a capacitor in @DS as the capacitors available in the component libray have SRF around 6-7 GHz but i need a capcitor working till 11 GHz so can some one tell me how can i design it and how much time will it take as i have very short time.

the substrate parameters are :
Material : Rogers
Er = 3.48
Loss Tangent = 0.004
Dielectric Thickness = 250 um
Thickness of metal = 70 um

thanks in advance.

/k
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top