Capacitors are NOT recognized by Momentum EM simulator.All you can do is to put 2 ports between capacitor plates' pads on layout and then connect a capacitor or equivalent circuit when you transfer your layout into schematic.
Capacitors are NOT recognized by Momentum EM simulator.All you can do is to put 2 ports between capacitor plates' pads on layout and then connect a capacitor or equivalent circuit when you transfer your layout into schematic.
It will be MiM capacitor,it's true but I think he has meant to connect a real/physical SMD capacitor between two points.
MiM capacitors have very low capacitance values,they can be used for very rarely.
It will be MiM capacitor,it's true but I think he has meant to connect a real/physical SMD capacitor between two points.
MiM capacitors have very low capacitance values,they can be used for very rarely.
if it's not possible to insert a capacitance in momentum ads how we can simulate a loop antenna? how we can simulate the effect of the tuning capacitance??
If you really want to consider the effect of the smd cap with ground plane you have to use a 3d-em simulator (HFSS, CST ...). At which frequency you are working?