Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can flicker noise pass through the coupling capacitor from 1st stage to 2nd stage?

Status
Not open for further replies.

Hooda

Member level 3
Joined
Feb 10, 2006
Messages
56
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
1,706
hi
in cascaded amplifier 2 stages
i want to know is the flicker noise can pass through the coupling capacitor from the first stage to the 2nd stage ?or can they contribute in the o/p of the 2nd stage
thanks in advance ;
 

Re: basic question

I think flicker noise is DC energy, so it won't pass through a decoupling cap. This, however, depends on the flicker corner of the amplifier and the Bandwidth of the highpass ac-coupling section
 

    Hooda

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top