bll_hb
Newbie level 6
Hello all,
How can i solve the warnings
If i run cailbre PEX i have many warnings ,No any Errors found
WARNING: Schematic instance M0 not found.
WARNING: Schematic instance 1/M0 not found.
WARNING: Schematic instance 2/M0 not found.
WARNING: Schematic instance 3/M0 not found.
WARNING: Schematic instance 4/M0 not found.
WARNING: Schematic instance 5/M0 not found.
WARNING: Schematic instance 6/M0 not found.
WARNING: Schematic instance 7/M0 not found.
WARNING: Schematic instance 8/M0 not found.
WARNING: Schematic instance 9/M0 not found.
WARNING: Schematic instance 10/M0 not found.
How can i solve the warnings
========================
CalibreView Settings:
// Output Library: sensor
// Schematic Library: sensor
// Cellmap File: ./calview.cellmap
// Log File: ./calview.log
// Calibre View Name: calibre
// Calibre View Type: maskLayout
// Magnify Devices by: 1.000000
// Magnify Parasitics by: 1.000000
// Create Terminals: if matching terminal exists on symbol
// Reset Properties: ("m=1")
//
log port port:"./calview.log"
NOTE: Creating CalibreView for cell COMBINERTEST20 ...
WARNING: Could not find schematic view of cell COMBINERTEST20 to copy properties from.
WARNING: Could not find symbol or schematic for cell COMBINERTEST20. All terminals in view calibre will be of type inputOutput.
WARNING: Schematic instance M0 not found.
WARNING: Schematic instance 1/M0 not found.
WARNING: Schematic instance 2/M0 not found.
WARNING: Schematic instance 3/M0 not found.
WARNING: Schematic instance 4/M0 not found.
WARNING: Schematic instance 5/M0 not found.
WARNING: Schematic instance 6/M0 not found.
WARNING: Schematic instance 7/M0 not found.
WARNING: Schematic instance 8/M0 not found.
WARNING: Schematic instance 9/M0 not found.
WARNING: Schematic instance 10/M0 not found.
WARNING: Schematic instance 11/M0 not found.
WARNING: Schematic instance 12/M0 not found.
*WARNING* (GE-2126): The snap spacing (xSnapSpacing: 0.001) is not a multiple of the manufacturing grid (mfgGridResolution: 0.005).
This snap spacing will not be modified, but specifing a multiple of the manufacturing grid is recommended.
*WARNING* (GE-2126): The snap spacing (ySnapSpacing: 0.001) is not a multiple of the manufacturing grid (mfgGridResolution: 0.005).
This snap spacing will not be modified, but specifing a multiple of the manufacturing grid is recommended.
Calibre View generation completed with 15 WARNINGs and 0 ERRORs.
Please consult the CIW transcript for messages.