Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Calibre lvs questions

Status
Not open for further replies.
D

design_oriented

Advanced Member level 4
Joined
Jan 21, 2010
Messages
103
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
1,991
Hi Guys,
What do the following variables mean?

My A.cal file has the following commands:

LAYOUT SYSTEM GDSII
SOURCE SYSTEM SPICE
LAYOUT PATH "A.gds2"
LAYOUT PRIMARY "B"
SOURCE PATH "C.cdl"
SOURCE PRIMARY "B"
LVS REPORT calibre_lvs.rep

I am using the following commands to run lvs. What do these commands do?

calibre -lvs A.cal | tee lvs.log
calibre -lvs A.cal -spice test -hier -automatch | tee lvs.log

Can I use the second command only when I have defined my LAYOUT SYSTEM has SPICE?

Any help will be greatly appreciated.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top