Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Calculation of PULLING resistance for PULL-UP and PULL-DOWN Bidirectional I/O PAD cel

Status
Not open for further replies.
D

dileep4111

Junior Member level 1
Junior Member level 1
Joined
Dec 30, 2012
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,372
Hi all,

I am doing library characterization for bidirectional pull-up(PDU02DGZ from tsmc) and pull-down(PDD02DGZ from tsmc) cells.Help me how to simulate for pulling resistance.

thank you.
 

dileep4111 said:
bidirectional pull-up(PDU02DGZ from tsmc) and pull-down(PDD02DGZ from tsmc) cells. Help me how to simulate for pulling resistance.
Click to expand...

I/O pad cells' output always can be disabled (OEN=1 , INPUT state is irrelevant). Run a DC analysis and measure the output impedance.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top