Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Calculation for E2/ E3/ E4 and T2/ T3/ T4

Status
Not open for further replies.

kengloong

Member level 4
Joined
Oct 15, 2005
Messages
68
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Singapore
Activity points
1,966
As I understand, the E1/ T1 calculation is as follow:-

E1 = Numbers of Bit X Total Numbers of Timeslot X Sampling Rate
= 8 Bits X 32 Timeslots X 8KHz
= 256 Bits X 8 KHz
= 2048Kbit/s

T1 = Numbers of Bit X Total Numbers if Timeslot + 1 Bit X Sampling Rate
= 8 Bits X 24 Timeslots + 1 Bit X 8KHz
= 192 Bits +1 Bit X 8KHz
= 193 Bits X 8KHz
= 1544Kbit/s

Anyone could shown me on the calculation for E2/ E3/ E4 and T2/ T3/ T4?

E2 = 8448Kbit/s
E3 = 34368Kbit/s
E4 = 139264Kbit/s

T2 = 6312Kbit/s
T3 = 44736Kbit/s
T4 = ?

Hope to hear from you all soon...
 

man_arief

Member level 3
Joined
Mar 20, 2006
Messages
58
Helped
6
Reputation
12
Reaction score
2
Trophy points
1,288
Activity points
1,585
I do not know how the math works, but as far as I know the frame length of higher signals (E2/E3/../T2/T3/...) are not related in any technical way to the basic E1 or T1. The relations, such as T2 = 2 * T1 or E2 = 4 * E1, are correct from an organizational point of view, and I think it is not show the relationship of the formatted data.

Br,
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top