Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadence PDK folder name duplication issue

Status
Not open for further replies.

goatmxj666

Member level 3
Member level 3
Joined
Mar 5, 2023
Messages
55
Helped
0
Reputation
0
Reaction score
1
Trophy points
8
Activity points
534
Hello

I'm designing a cadence pdk and I have a problem.

The folder with the pdk for bcd process and the folder with the pdk for RF process have the same name.

The name of the zip file is also the same.

I am already using the bcd process and want to add the new RF process.

Can I change the name of the RF process folder?

,or is it okay to change the name of the folder I got when I unzipped it?

In the past, I had a problem with the bcd process being automatically connected to the model library when I used the RF process, so I had to set the model library manually each time.

I was wondering how to solve this case.
 
Last edited:

"Same name" means nothing. If you jammed two PDKs' contents into the
same folder then you might make a mess. But two PDK trees under (say)
/processes/bcd and /processes/rf is normal.

You should / must have some project management setup scripts to get
all the links defined. If those are right then you get what you need, if
you are not asserting the setup prior to opening the session then you
are at the mercy of history and defaults.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top