Cadence IC tools (library )

Status
Not open for further replies.
M

m_kuty

Member level 2
Joined
Mar 2, 2015
Messages
46
Helped
1
Reputation
2
Reaction score
1
Trophy points
8
Activity points
333
Hello

I am new designer with cadence IC tools, My question is (How can i add new model (like nmos4 and pmos4) to my library tsmc13rf
 

If these models are not from that foundry*flow then they ought
to use the analogLib primitives and you specify the model path
to suit yourself. TSMC surely doesn't want to know about your
provate models.
 
dick_freebird said:
If these models are not from that foundry*flow then they ought
to use the analogLib primitives and you specify the model path
to suit yourself. TSMC surely doesn't want to know about your
provate models.
Click to expand...

thank you dick_freebird for reply
can you explain to me more?
 

m_kuty said:
can you explain to me more?
Click to expand...

I think this means:

a) If you want your design to be produced by TSMC, use their models, and nothing else.

b) If you just want to simulate your design, you should refer the additional models to the Cādence analogLib primitive models.
 
Reactions: bll_hb

    B

    bll_hb

    Points: 2
    Helpful Answer Positive Rating
You can't add anything to technology library, because any PDK does not let it happen. They are in READ-ONLY mode. Every device in tech library (in this case tsmc13rf) are characterized by FAB. If you want to just use a transistor model you can use analogLib elements. But these are not real elements hence these cannot be produced. They can be only simulated.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…