rabit
Newbie level 4
cadence cell view
I following the Cadence Cell Design Tutorial for layout, cadence version is ic5141.
I work well for the tutorial until in chapter4( ~/doc/celltut/chap4.html) , that is running LVS with the extracted layout and schematic. I can't get the LVS report as the tutorial list , the LVS is failed and find the following messages in 'si.log' :
Begin netlist: Apr 22 00:07:56 2007
view name list = ("auLvs" "extracted" "schematic")
stop name list = ("auLvs")
library name = "tutorial"
cell name = "mux2"
view name = "extracted"
globals lib = "basic"
Running Artist Flat Netlisting ...
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
global error:
Cannot find switch master cell for instance +13 in cellView (mux2 extracted) from viewlist 'auLvs extracted schematic ' in library 'tutorial'.
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
global error: .......................
I don't know why!
Can you help me?
Thank,
Added after 50 minutes:
I had solved it, Thanks.
I following the Cadence Cell Design Tutorial for layout, cadence version is ic5141.
I work well for the tutorial until in chapter4( ~/doc/celltut/chap4.html) , that is running LVS with the extracted layout and schematic. I can't get the LVS report as the tutorial list , the LVS is failed and find the following messages in 'si.log' :
Begin netlist: Apr 22 00:07:56 2007
view name list = ("auLvs" "extracted" "schematic")
stop name list = ("auLvs")
library name = "tutorial"
cell name = "mux2"
view name = "extracted"
globals lib = "basic"
Running Artist Flat Netlisting ...
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
global error:
Cannot find switch master cell for instance +13 in cellView (mux2 extracted) from viewlist 'auLvs extracted schematic ' in library 'tutorial'.
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
*WARNING* invalid cell view -- 0(unknown)
global error: .......................
I don't know why!
Can you help me?
Thank,
Added after 50 minutes:
I had solved it, Thanks.