Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BSIM model design flow

Status
Not open for further replies.

richloo

Full Member level 1
Joined
Aug 24, 2004
Messages
95
Helped
9
Reputation
18
Reaction score
4
Trophy points
1,288
Location
Isolated Island
Activity points
748
Can anyone tell me about the design flow on how the bsim model is created?
Thanks in advance.
 

andy2000a

Advanced Member level 2
Joined
Jul 18, 2001
Messages
597
Helped
14
Reputation
28
Reaction score
8
Trophy points
1,298
Activity points
5,298
simple I/O port

1. use s2ibis convert I/O spice file to Ibis sweep spice file .
and you need hspice (linux or windows) can sweep Vcc & IO

2. run hspice sweep many case ..and usually have "not converge"

3. get ibis file

4. hspice use IBIS model simulation I/O and compare Hspice origial I-V curve

if USB2 I/O ..u need IBIS 3.2 or high verion .and make different Port
or USB2 high speed IO , and use hyplex IBIS viewer view you IBIS model .
 

    richloo

    points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top