Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bias_OK should go if HIGH the final current is in the range of +/-10 of its final val

Status
Not open for further replies.
N

nannapaneni

Junior Member level 3
Junior Member level 3
Joined
Feb 25, 2011
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,480
I am designing self biasing current source, I need to provide extra pin bias_ok such that Bias_OK should go if HIGH the final current is in the range of +/-10 of its final value. Can someone pls share idea how to add this pin.

My current is settling in 200us with some ringing and startup is off within 20us.
I am adding schematic for reference.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top