Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

best way to create this gsm/sensors project ?

Status
Not open for further replies.

Stonexage

Newbie level 5
Joined
Mar 8, 2010
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
earth
Activity points
1,355
Hello ,hope this is the right forum for my question .
I'm going to create a kit with sensors connected to MCU and gsm module to send the gathered data via the gsm module to a website .
So , is it easier/better to create a website that can receive/send the data from/to the far away gsm module .
or do i have to add another gsm module and connect it to the PC and receive the data from the far away kit/gsm module .
in case i need to create a website what is the best programming language i have to use that can communicate with the gsm network .
 

hobbyckts

Advanced Member level 1
Joined
Mar 12, 2015
Messages
481
Helped
88
Reputation
176
Reaction score
85
Trophy points
28
Activity points
2,457
You can try by creating a webpage and send data to that.

Whereas if you use a one more GSM module which is connected with the PC. You need to send the data as a message that could probably take more time to complete the operation.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top