Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Beagle bone black to I/O expander

Status
Not open for further replies.

jovin555

Advanced Member level 4
Full Member level 1
Joined
May 20, 2012
Messages
115
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Visit site
Activity points
2,036
i am trying to interface beagle bone black to TCA6424ARGJR(I/O expander). The i/o expander's 31st pin should be connected to the working voltage of the master ic.So to what voltage should i connect it in beagle bone.I am using 3.3V as power supply for I/o expander.Beagle bone has lot of voltages such as VDD3V3A,VDD3V3B etc.So to which 3.3V should i connect the Vcci pin of I/O expander?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top