Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Bandwidth requirement of Ultra Wideband Antenna

Status
Not open for further replies.

Vineeth m p

Junior Member level 1
Joined
Sep 22, 2012
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,418
Hi all,

The bandwidth allocated for ultra wide band radios is 3.1-10.6 GHz. My question is, is it necessary for an antenna in a device that operates within this band should be able to cover whole of this band?

Regards MP
 

hi there

well that would be up to the designer of the transmitter/receiver and its bandwidth requirements, then design a antenna to suit

there's no point in having an antenna that covers 7GHz if the equip only needs a couple of GHz

Dave
 

Hi there,
well, the antenna is considered to be UWB when it has minimum 25% of bandwidth within the range released by FCC

calculate it from here

BW = [f (higher) -f (lower)]/ f (centre)

f centre = [f (higher) +f (lower)]/2


hope this helps
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top