yviswanathbe
Full Member level 4
Hi,
I am using ATMEGA8L Microcontroller and Code Vision AVR Compiler.
When i tried to program the device i am getting following message.
Chip Signature Mismatch.
Read: Byte0=1Eh Byte1=00h Byte3=07h
Must be: Byte=1Eh Byte1=93h Byte3=07h
I also tried selecting Programming and Verification disabled unser Flash Lock Bits Section.But same message is coming.
Can anybody help me out in this regard.
Thanks and Regards,
Viswanath
I am using ATMEGA8L Microcontroller and Code Vision AVR Compiler.
When i tried to program the device i am getting following message.
Chip Signature Mismatch.
Read: Byte0=1Eh Byte1=00h Byte3=07h
Must be: Byte=1Eh Byte1=93h Byte3=07h
I also tried selecting Programming and Verification disabled unser Flash Lock Bits Section.But same message is coming.
Can anybody help me out in this regard.
Thanks and Regards,
Viswanath