james
Member level 2
at89cx051
The thread had been posted and deleted originally from Microcontrollers Design Section. I posted again here, as this section seems proper for all simulation issues.
To install properly the model you have to:
1. unrar the AT89C2051.rar file in a temp directory.
2. Copy the file AT89C2051.MDF in Proteus MODELS dir
3. Copy the file AT89C2051.LIB in Proteus LIBRARY dir
4. Copy the file AT89C2051.pdf in Proteus DATA dir. It's the datasheet which one can call pushing on DATA button in Edit Component Dialog.
5. The files AT89C2051_TEST.DSN and LedBlink.hex are nothing else that simple test.
The model has been created for Proteus 6.2 SP2 and tested for Proteus 6.2 SP3 and SP4 as well.
The version 1.1 of current model has been fixed to prevent the system hang up when tested estensively using EX0 and EX1 interrupts.
The AT89C2051.rar is not password protected.
The thread had been posted and deleted originally from Microcontrollers Design Section. I posted again here, as this section seems proper for all simulation issues.
To install properly the model you have to:
1. unrar the AT89C2051.rar file in a temp directory.
2. Copy the file AT89C2051.MDF in Proteus MODELS dir
3. Copy the file AT89C2051.LIB in Proteus LIBRARY dir
4. Copy the file AT89C2051.pdf in Proteus DATA dir. It's the datasheet which one can call pushing on DATA button in Edit Component Dialog.
5. The files AT89C2051_TEST.DSN and LedBlink.hex are nothing else that simple test.
The model has been created for Proteus 6.2 SP2 and tested for Proteus 6.2 SP3 and SP4 as well.
The version 1.1 of current model has been fixed to prevent the system hang up when tested estensively using EX0 and EX1 interrupts.
The AT89C2051.rar is not password protected.