james said:This new release, the version 1.4, solves a couple of issues for both AT89C2051 and AT89C4051. Furher a new micro of the same family, the AT89C1051, has been included.
Issues solved:
1. Fatal Error:
"[U1_U1_ADC#0007] Node U1_VDD not found whilst binding pin V+ of U1_U1_ADC#0007!". This problem may happens using CMOS in your drawings using older 2051 and 4051 models. Fixed.
2. Warning Errors :
"Warning: [U1_#P] SPICE failed to connect pin V+!"
"Warning: [U1_#P] SPICE failed to connect pin V-!"
3. Now all micros take place into a single library named AT89CX051.LIB
No further issues raised at moment.
AT89C1051 - new micro has been created. The differences between 2051 and 4051 are listed below:
64 x 8 internal static RAM
1024 Byte of Code Memory.
INSTALLATION NOTE:
1. Unrar the file AT89CX051_V14.RAR in a temp directory
2. Copy all files from DATA, LIBRARY and MODELS into the respectives directories of Proteus.
3. The directory JIGS contains test jigs files for all models.
COMPATIBILITY WITH OLDER VERSIONS
Drawings using older versions must be upgraded to made them working.
However this is an easy job to be made. Follow the few points as below:
1. Push on Pick Device button.
2. Select library and click twice on device you want upgrade in your drawing.
3. Answer OK to Update all instances of device you selected.
4. Save your drawing.
That's it !
Enjoy
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?