Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Assign an E field in HFSS

Status
Not open for further replies.

beandpp

Newbie level 1
Newbie level 1
Joined
Aug 25, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
6
Hello!
I'm working on a project: There is a titanium bar in the salt water, and an E field along the bar with 100 V/m at 64 MHz. It should be a wave guide. I set up the model and assigned the material, but I don't know how to assign the E field and plot it. Attached is my hfss doc. Could anyone help me on this or teach me how to assign the field? Thank you!!!
 

Attachments

  • 8_25.rar
    31.9 KB · Views: 91

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top