Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Art2003 hardware not recognized by WinPic800

Status
Not open for further replies.

Tipu606

Full Member level 3
Joined
Jun 5, 2011
Messages
159
Helped
25
Reputation
50
Reaction score
25
Trophy points
1,308
Activity points
2,058
Hi !
I built the Art2003 programmer(PIC18F2550) on a breadboard and connected it to the computer parallel port but WinPin800 ver 3.59 fails to detect hardware.
it says "hardware not responding"
Can anyone please advise what to do now?
I installed the WinPic800 software but at start it says failed to find WP800IO.sys file although it is in the Program Files folder
thanks !
EDIT: a friend solved the problem on his computer
 
Last edited:

This problem looks like windows/winpic800 (software kind problem).

Deinstall / Remove WinPic800 / delete complete folder if exist and install again.

Check PCB connections.

Should work.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top