optionfa
Newbie level 3
- Joined
- Oct 21, 2009
- Messages
- 3
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Toronto Ontario
- Activity points
- 1,312
I need to generate three SPWM (sine pulse width modulation) signals as inputs to a gate drive IC on the three phase inverter I am building.
I am not familiar with DSP programming, I have very limited experience with a MCU but thats it, I will need three SPWM waveforms triggerd off each other 120 degrees apart.
I am hoping to get some input from anyone that has experience with this particular application and basically need to know what I will need to get this stage of my build up and running. IE what kind of DSP I need to buy and if there are any open source codes for my particular application.
I will be inputting into the following IC: http://www.irf.com/product-info/datasheets/data/ir2136.pdf
Which will drive my three phase IGBT bridge.
Thanks.
I am not familiar with DSP programming, I have very limited experience with a MCU but thats it, I will need three SPWM waveforms triggerd off each other 120 degrees apart.
I am hoping to get some input from anyone that has experience with this particular application and basically need to know what I will need to get this stage of my build up and running. IE what kind of DSP I need to buy and if there are any open source codes for my particular application.
I will be inputting into the following IC: http://www.irf.com/product-info/datasheets/data/ir2136.pdf
Which will drive my three phase IGBT bridge.
Thanks.