Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

antenna designing using hfss antenna design kit

Status
Not open for further replies.

juni1122

Member level 1
Member level 1
Joined
Oct 3, 2013
Messages
35
Helped
1
Reputation
2
Reaction score
0
Trophy points
8
Visit site
Activity points
230
hi
i want to design a patch line fed ,and pifa antenna with a gain of 6 and operating frequency 900Mhz
but the problem is that when i give all the relative parameters and it gives me a ready to go design in hfss
it does not give any rsults and the port is also not assigned
i want to know that are there some post design steps as well if you are using ADK
and if there are some tutorials available please tell me i didnt find any on the internet
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top