Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

antenna design using IE3D

Status
Not open for further replies.
P

Payalp

Newbie level 1
Newbie level 1
Joined
Jan 13, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
6
I want to design an antenna element in IE3D.The antenna consists of a pair of folded dipoles.The dipoles are coupling fed by an L-shaped microstrip line.The dipoles are printed on backside of the substrate while the L-shaped microstrip line is etched on the front side of the same substrate and it is fed using a 50ohm coaxial cable.
Can anybody help me with this design..plz..???
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top